This is a Quality Remanufactured Ford Injector Driver Module (IDM). It is remanufactured and tested to the strictest OE standards for optimal performance. 100% visually inspected and quality tested, and is backed by our 100% satisfaction guarantee. The remanufacturing process that these IDMs go through improve upon the OEM design.This process includes an improved seal to prevent common failures due to moisture.We are a trusted source for remanufactured IDM's.Our IDM's come pre-programmed ready...

Brand New glow plug controllers for Ford Power Stroke Diesel applications. This new unit properly heats the vehicle's glow plugs and ensures that your diesel engine starts smoothly in cold weather. 

This ball tube kit is highly recommended when installing Ford 6.0L Powerstroke injectors. The wear of the o-ring in the rail causes premature erosion of the Injector Oil Seal at the top of the injector, causing them to fail. Our repair kits are brand new including the Ball Tube and O-ring. Ball Tube Retainer torque specification is 100 ft.lbs.

This tool is used for the installation of the highly recommended Ball Tube Repair Kits for the Ford 6.0L Powerstroke application. The Ball Tube Retainer torque specification is 100 ft.lbs.

Brand new harness connectors for Ford 6.0L Fuel Injection Control Modules. These include the cavity plugs. Pins are not included, so we recommend that you use an appropriate extraction tool or stripping/crimping tool.

Brand new harness connectors for Ford 6.0L Fuel Injection Control Modules. These include the cavity plugs. Pins are not included, so we recommend that you use an appropriate extraction tool or stripping/crimping tool.

Brand new harness connectors for Ford 6.0L Fuel Injection Control Modules. These include the cavity plugs. Pins are not included, so we recommend that you use an appropriate extraction tool or stripping/crimping tool.

We offer the FICM connector pigtails as an option for our customers to splice wires instead of crimping or extracting pins.

We offer the FICM connector pigtails as an option for our customers to splice wires instead of crimping or extracting pins.

We offer the FICM connector pigtails as an option for our customers to splice wires instead of crimping or extracting pins.

This tool is used to extract the pins from FICM connectors for replacement. These are delicate tools, so we recommend purchasing a spare just in case.

This seal kit includes all of the o-rings for the Ford 6.0L Powerstroke injector.