Mounting kit for the Dodge Cummins 5.9L turbocharger.

Mounting kit for the 6.4L Ford Powerstroke

Brand new GM 6.5L fuel injection pump wiring harness. This connects the pump mounted driver (PMD) to the pump. It is standard length and has the rounded connector.

Mounting kit for the Dodge Cummins 6.7L turbocharger.

This is a brand new Injection Fuel Line for 2004.5-2005 GM LLY Duramax Diesels. The fuel lines on the engine are often contaminated with rust and debris, and is recommended the fuel lines are to be changed when replacing injectors.

This is a brand new Injection Fuel Line for 2004.5-2005 GM LLY Duramax Diesels. The fuel lines on the engine are often contaminated with rust and debris, and is recommended the fuel lines are to be changed when replacing injectors.

This is a brand new Injection Fuel Line for 2004.5-2005 GM LLY Duramax Diesels. The fuel lines on the engine are often contaminated with rust and debris, and is recommended the fuel lines are to be changed when replacing injectors.

This is a brand new Injection Fuel Line for 2004.5-2005 GM LLY Duramax Diesels. The fuel lines on the engine are often contaminated with rust and debris, and is recommended the fuel lines are to be changed when replacing injectors.

This tool is used for the installation of the highly recommended Ball Tube Repair Kits for the Ford 6.0L Powerstroke application. The Ball Tube Retainer torque specification is 100 ft.lbs.

This ball tube kit is highly recommended when installing Ford 6.0L Powerstroke injectors. The wear of the o-ring in the rail causes premature erosion of the Injector Oil Seal at the top of the injector, causing them to fail. Our repair kits are brand new including the Ball Tube and O-ring. Ball Tube Retainer torque specification is 100 ft.lbs.

Brand new harness connectors for Ford 6.0L Fuel Injection Control Modules. These include the cavity plugs. Pins are not included, so we recommend that you use an appropriate extraction tool or stripping/crimping tool.

Brand new harness connectors for Ford 6.0L Fuel Injection Control Modules. These include the cavity plugs. Pins are not included, so we recommend that you use an appropriate extraction tool or stripping/crimping tool.